Epson V11H923620 User Manual page 291

32 to 113 °F (0 to 45 °C) at an altitude of 7500 feet (2286 m) or less, or 32 to 104 °F (0 to 40 °C) at an
altitude of 7500 to 10000 feet (2286 to 3048 m)
When using multiple projectors at the same time:
32 to 104 °F (0 to 40 °C) at an altitude of 7500 feet (2286 m) or less, or 32 to 95 °F (0 to 35 °C) at an
altitude of 7500 to 10000 feet (2286 m to 3048 m)
Doing so may cause an unstable display and could lead to projector damage. Do not use or store the
projector where it may be exposed to sudden changes in temperature.
• Do not use or store the projector in places where it might be subjected to high and low extremes of
temperature.
• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or
in direct sunlight for long periods of time. Doing so may cause damage to the case.
• Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not
bring your hands or face close to the vents while projection is in progress. Do not bring your face close
to the projector while it is in use.
• Before you move the projector, make sure its power is turned off, the plug is disconnected from the
outlet, and all cables are disconnected. Fire or electric shock may result.
• Do not place the source of an open flame, such as a lit candle, on or near the projector.
• During projection, do not block the light from the projector with a book or other objects. If the light from
the projector is blocked, the area on which the light shines becomes hot which could cause it to melt,
burn, or start a fire. Also, the lens may get hot due to the reflected light which could cause the
projector to malfunction. To stop projection, use the A/V Mute function, or turn off the projector.
• Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or
pull it excessively. Keep the power cord away from hot electrical appliances. Do not use the power
cord if it is damaged. Fire or electric shock may result. Contact your dealer if the cable becomes
damaged.
• Always lower the volume before turning off the projector. Turning on the projector with the volume too
high can damage your ears.
• When a still image is displayed for a long time, image retention may occur on the screen. Do not
display images in the exact same position for long periods.
• Always attach the lens cover to the lens when not using the projector to prevent the lens from
becoming dirty or damaged.
• Incorrect battery usage may cause leakage of battery fluid and battery rupture, which could result in
fire, injury, or corrosion. When replacing batteries, take the following precautions: insert batteries so
that the polarities are correct; do not use batteries of different types or mix old and new batteries; do
291