Playing Records; Ep Record Adaptor; Power Switch (Power ); Start/Stop Button (Start - Stop ) - Technics SL-1200M3D Operating Instructions Manual

・＋6
・ 3.3
・ 0 %
・−3.3
start･stop
33
Cue lever
EP record
adaptor
Stylus light

Stylus light switch

Preparation
Indicator
lights
33 45
45
When play finishes
To temporarily stop play
Lift the cue lever.
The stylus lifts off the record.
When using EP records
To light up the stylus
•Press the stylus light switch. The light rises up and illuminates the
stylus.
•When the light is not required, press it down. The light also goes
out.
Press the switch firmly. If the switch is lightly pressed, the light may
come on but not rise up.

Playing records

Put a record on the turntable.
Take off the stylus cover and release the arm clamp.
Turn [power] to turn the unit on.
•The pilot lamp comes on.
1
•33
/ rpm is automatically selected and the indicator lights.
3
•Press [45] if you are playing a 45 rpm record.
Press [start-stop].
The turntable starts revolving.
Lift the cue lever and move the tone arm over
the record.
Lower the cue lever.
The tone arm moves down and play starts.
Lift the cue lever and move the tone arm back to the arm rest.
Press [start-stop].
The electronic brake gently stops the turntable.
Turn [power] to turn the unit off.
Clamp the tone arm and put the stylus cover back on.
Take the adaptor out of its holder
spindle.
Press [45] to change the speed.
and fit it over the center
RQT4912
9