Storing Stations In Memory - Panasonic SL-CT579V Operating Instructions Manual

Button control guide (Listening to the Radio)
HOLD Slide in direction of arrow.
HOLD 1
(Function lock)
(Slide in opposite direction to cancel.)
Radio on/
Press.
Change
RADIO/BAND
≥Press again to change the band.
Each time you press the button:
band
FM
Press.
≥Press and hold to scan the stations rapidly.
9, i
Select the
≥"TUNED" appears when tuned.
Forward)
(
≥When "M" is displayed, press [TUNING
station
:, j
MODE] to cancel it.
(Backward)
i, VOL
Volume
(Increase)
control
Press.
j, VOL
(0 to 25)
(Decrease)
Set to "CITY" if reception is poor or if there
Receive
is interference from another station.
an FM
Each time you press and hold
% CITY/NOR
[ % CITY/NOR]
broadcast
clearly

Storing stations in memory

Store the frequencies of up to 30 stations; 20 FM and 10 AM.
1 Slide [HOLD1] in the opposite direction to the arrow to cancel.
2 Press [RADIO/BAND] to turn the tuner on and change the band.
3 Press [TUNING MODE] to display "M".
FM
1
1 07 10
4 Press [RECALL, MEMORY].
FM
1
98 00
5 Do each of the following within 10 seconds.
1Press [:, s] or [9, r] to select the frequency.
1
≥ Press and hold to scan the stations rapidly.
2Press [RECALL, MEMORY].
3Press [:, s] or [9, r] to select the memory number.
1 ≥ Press and hold to change incrementally.
4Press [RECALL, MEMORY] to confirm the setting.
Listening to a memorized station
1 Perform steps 1 to 3 for "Storing stations in memory" ( ➪ above).
2 Press [:, s] or [9, r] to select the memorized station.
≥ Press and hold to change incrementally.
≥ "TUNED" appears when tuned.
3 Adjust the volume.
() AM
FM
FM
M
1
1 07 10
1 07 10
CITY
No display
(canceled)
M
M
1
06 00
1
Select
stereo or
MONO/ST,
FM MODE
monaural
FM
Sound
quality
Turn off
∫, OPR OFF
To obtain good reception
AM
Try various directions to obtain
optimum reception.
FM
The headphone cord is also the FM antenna, so extend it instead
of leaving it coiled.
Erasing a memorized station
1 Perform steps 1 to 3 for "Storing stations in memory" ( ➪ left).
2 Press [ : , s ] or [ 9 , r ] to select the memorized station to
be erased.
≥ Press and hold to change incrementally.
3 Press [RECALL, MEMORY].
The frequency number flashes.
4 Do each of the following within 10 seconds.
1Press and hold [RECALL, MEMORY] until "- - - -" flashes.
2Press [RECALL, MEMORY].
When using overseas
Change the frequency step according to the area.
1 Press [RADIO/BAND] to switch on the power.
2 Press and hold [RADIO/BAND] until the step appears.
FM
M
U0 2
3 Do each of the following within 10 seconds.
1Press [:, s] or [9, r] to select the step.
1Each time you press [:, j] or [9, i]
U0.2
FM 0.2 MHz,
AM 10 kHz
(original setting)
2Press and hold [RECALL, MEMORY] until the frequency appears to
confirm the step.
∫To return to the previous frequency step
Repeat the above procedure.
≥Changing the step erases the stations you stored in memory.
6
Set to "MONO" when there is noise during FM
reception.
Sound becomes monaural, but noise is reduced.
Each time you press [MONO/ST,
FM MODE]
MONO
Each time you press [EQ]
S-XBSr
S-XBS
Boosts the Enhanced
EQ
bass S-XBS
≥The effect may differ with different kinds of
music.
Press.
FM
M
1
- - - -
FM
U0.1
FM 0.1 MHz,
AM 10 kHz
No display
(stereo)
No display
(canceled)
E
FM 0.05 MHz,
AM 9 kHz
RQT8256