Storing Stations In Memory - Panasonic SL-CT582V Operating Instructions Manual

Button control guide (Listening to the Radio)
Slide in direction of arrow.
(Slide in opposite direction to cancel.)
HOLD
HOLD 1
< HOLD >
(Function lock)
≥The unit and remote control each have
Radio on/
Press.
RADIO/BAND
Change
≥Press again to change the band.
< RADIO >
band
Press.
9, i
< 9 >
≥Press and hold to scan the stations rapidly.
Select the
Forward)
(
≥"TUNED" appears when tuned.
≥When "M" is displayed, press [TUNING MODE]
station
:, j
< : >
(Backward)
i, VOL
Volume
(Increase)
control Press.
j, VOL
(0–25)
(Decrease)
Set to "CITY" if reception is poor or if there
Receive
is interference from another station.
an FM Each time you press and hold
% CITY/NOR
[ % CITY/NOR]
broadcast
clearly

Storing stations in memory

Store the frequencies of up to 30 stations; 20 FM and 10 AM.
1 Slide [HOLD1] in the opposite direction to the arrow to cancel.
2 Press [RADIO/BAND] to turn the tuner on and change the band.
3 Press [TUNING MODE] to display "M".
FM
1
07 10
1
4 Press [RECALL, MEMORY].
FM
1
98 00
5 Do each of the following within 10 seconds.
1Press [:, s] or [9, r] to select the frequency.
≥ Press and hold to scan the stations rapidly.
1
2Press [RECALL, MEMORY].
3Press [:, s] or [9, r] to select the memory number.
≥ Press and hold to change incrementally.
1
4Press [RECALL, MEMORY] to confirm the setting.
Listening to a memorized station
1 Perform steps 1 to 3 for "Storing stations in memory" ( ➪ above).
2 Press [:, s] or [9, r] to select the memorized station.
≥ Press and hold to change incrementally.
≥ "TUNED" appears when tuned.
3 Adjust the volume.
independent HOLD switches.
Each time you press the button:
() AM
FM
to cancel it.
FM
M
1
1 07 10
1 07 10
CITY
No display
(canceled)
M
M
1
References to the remote control apply only to
< > indicates the buttons for the remote control.
Select
stereo or
monaural
FM
Sound
quality
FM
Turn off
To obtain good reception
AM
Try various directions to obtain
optimum reception.
FM
The earphone cord is also the FM antenna, so extend it instead
of leaving it coiled.
Erasing a memorized station
1 Perform steps 1 to 3 for "Storing stations in memory" ( ➪ left).
2 Press [ : , s ] or [ 9 , r ] to select the memorized station to
be erased.
≥ Press and hold to change incrementally.
3 Press [RECALL, MEMORY].
The frequency number flashes.
4 Do each of the following within 10 seconds.
1Press and hold [RECALL, MEMORY] until "- - - -" flashes.
2Press [RECALL, MEMORY].
When using overseas
Except Europe:
Change the frequency step according to the area.
1 Press [RADIO/BAND] to switch on the power.
FM
M
1 06 00
2 Press and hold [RADIO/BAND] until the step appears.
3 Do each of the following within 10 seconds.
1Press [:, s] or [9, r] to select the step.
1Each time you press [:, j] or [9, i]
9
AM 9 kHz
(original setting)
2Press and hold [RECALL, MEMORY] until the frequency appears
to confirm the step.
∫To return to the previous frequency step
Repeat the above procedure.
≥Changing the step erases the stations you stored in memory.
6
Set to "MONO" when there is noise during FM
reception.
Sound becomes monaural, but noise is reduced.
Each time you press [MONO/ST,
MONO/ST,
FM MODE
FM MODE]
MONO
Each time you press [EQ]
S-XBSr
S-XBS
Enhanced
Boosts the
EQ
S-XBS
bass
≥The effect may differ with different kinds of
music.
Press.
(Main unit)
∫, OPR OFF
< RADIO >
Press and hold.
MONO FMAM
S-XBS
U0 9
.
SL-CT582V
No display
(stereo)
No display
(canceled)
(Remote control)
10
AM 10 kHz
RQT7861