O Sound Design Memory - Panasonic CQ-DFX77EUC Operating Instructions Manual

Sound Design Memory
Sound Design Memory Mode
A desired sound setting (except for VOL and ATT) can be memo-
rized and recalled.
E Fi thé Ti
i A | al
Sound Design Memory Input
ress and Hold)... e Press [SDM] to select to the sound design memory mode.
e To preset sound setting, press the corresponding preset memo-
ry button [1] to [4] for more than 2 seconds in Sound Design
Memory mode until the display blinks.
rte
Cri that Ld
a ae ee ar í
è The preset memory buttons [5] and f6] are not valid for set
sound design memory. (call only)
Recall Programmed Sound
Design Memory
e When a desired preset memory button is pressed in sound
memory mode, the corresponding sound setting is called.
Pai that
e The preset memory button [5] is recommended for setting.
e The preset memory button [6] is used to release all sound set-
tings.
To change to normal mode
Press [SDM] or DISP[D] to change to the normal mode.
Note: When the sound design memory mode is selected but no
operation is made within 5 seconds, the mode will return to the
normal mode.
CO-DFX77/DFX55/DF66/DF44EUC