Removing The Nozzle Ring; Fig. 43: Removing The Nozzle Ring - ABB A130-M65 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting / 8.9 Removing the nozzle ring
8.9

Removing the nozzle ring

Fig. 43: Removing the nozzle ring
1. If present: Remove the metal C-ring (51105).
2. Position the fastening strips (51002) in place.
3. Pull out the nozzle ring (56001) with the two extraction devices (90070) and the service
support base (90012).
4. Remove the lamellar sealing ring (56005).
5. Remove the burst ring (57210).
© Copyright 2018 ABB. All rights reserved. HZTL4031_EN Revision G October 2018