Connecting Your Computer - Vivitek 51" Micro Display Projection TV User Manual

Connecting Your Computer

Using PC INPUT
1. Turn off the power of the RPTV and Computer.
2. Connect a VGA cable from the VGA CARD of your computer to the PC input in the rear of your RPTV .
3. Connect the Audio Out mini-jack from your computer to the VGA Audio ( L/R ) from the rear of your RPTV.
4. Turn on the power of the RPTV and your computer.
5. Select RGB using the INPUT button on the right side of the RPTV or on the remote control.
Back of Rear Projection TV
Do not connect any cable
For service only connector is for
production testting and service
only. Could not connect any
irrelevant computer cable that will
be dameage your RPTV .
FOR SERVICE ONLY
DIGITAL
AUDIO
OUTPUT
(ATSC only) (ATSC only)
COAXIAL
OPTICAL
Note:
a). The PC input on your RPTV supports High-bandwidth Digital Content Protection (HDCP). HDCP encrypts the
transmission between the video source and the digital display for added security and protection.
b). Refer to your computer User Manual for more information about the video output requirements of the product.
AUDIO(L/R)
(RS-232C)
S-VIDEO
VIDEO
L L
P
AUDIO
R R
P
AV IN1 AV IN1 AV IN2 AV IN2
RGB TERMINAL
Connecting the
computer to display
the PC MODE
(See page 25)
PC INPUT PC INPUT
RGB
L
AUDIO
R
Enter the S-VIDEO or the VIDEO terminal
can be used, but the S-VIDEO overrides
the VIDEO terminal.
Y Y
L P
L
B B
AUDIO AUDIO
R P
R
R R
COMPONENT IN1 COMPONENT IN2
13
HDMI
CENTER CHANNEL CENTER CHANNEL
INPUT
Make sure ANALOG/DIGITAL RF
Inputs are connected correctly.
DIGITAL
ANALOG
ANTENNA IN