Connecting Your Dvd Player - Vivitek 51" Micro Display Projection TV User Manual

Connecting your DVD Player

Using S-Video or Composite video
1. Turn off the power of the RPTV and DVD player.
2. Connect the S-Video or video (yellow color) terminal from the rear of your DVD player to the S-Video or video
(yellow color) terminal in the AV IN on the rear of your RPTV.
3. Connect the R (red color) and L (white color) audio connectors from the rear of your DVD player to the R (red
color) and L (white color) audio input connectors in the AV IN 2 on the rear of your RPTV.
4. Turn on the power of the RPTV and DVD player.
5. Select AV 2 using the INPUT button on the right side of the RPTV or on the remote control.
Back of Rear Projection TV
FOR SERVICE ONLY
DIGITAL
AUDIO
OUTPUT
(ATSC only) (ATSC only)
COAXIAL
OPTICAL
Note:
a). If you are already using the AV IN 2input for another component, or you do not want to use the AV IN 2 input for
the DVD player, you can connect the DVD player to the AV IN 1 group of connections.
b). Refer to your DVD player User Manual for more information about the video output requirements of the product.
AUDIO(L/R)
(RS-232C)
Enter the S-VIDEO or the VIDEO terminal
can be used, but the S-VIDEO overrides
S-VIDEO the VIDEO terminal.
VIDEO
Y
L L
P
B
AUDIO
R R
P
R
AV IN1 AV IN1 AV IN2 AV IN2 COMPONENT IN1 COMPONENT IN2
PC INPUT PC INPUT
RGB
L
AUDIO
R
Y
L P L
B
AUDIO AUDIO
R P
R
R
VIDEO Equipment
10
HDMI
CENTER CHANNEL CENTER CHANNEL
INPUT
Make sure ANALOG/DIGITAL RF
Inputs are connected correctly.
ANALOG DIGITAL
ANTENNA IN