GE GTS16DTHBB Quick Use & Care page 4

REVERSING THE DOOR SWING
TO RE-HANG THE DOORS
1. Remove the hinge pin from the lower hinge bracket.
2. Remove the lower hinge bracket.
3. Install bottom hinge bracket on the opposite side of the
opening.
4. Install the lower hinge pin into the hinge bracket hole to the
outside of the refrigerator.
5. Remove the center hinge bracket.
Switch the
hinge pin to the
opposite side of
the bracket.
Hinge
Pin
Plastic
Hinge
Washer
Bracket
6. Install center hinge bracket on the opposite side of the
opening. (You will have to turn the hinge over to install.)
7. Position the fresh food door, tilted forward, over the lower
hinge pin and slide it into place.
Installation Instructions
Plastic
Washer
Hinge
Pin
Hinge
Bracket
(Cont.)
8. Install the center hinge pin into the center hinge bracket
and into the hole in the fresh food door. Make sure the
washer is in place over the hinge pin on top of the bracket.
9. Place the freezer door on top of the center hinge pin.
10. With the freezer door in place, replace install the top hinge
into the top of the freezer door. The holes in the hinge will
align with 2 of the holes on top of the refrigerator. Install
the 2 screws into the top hinge.
4