VIVOTEK
IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?
method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]
[&return=<return page>]
PARAMETER VALUE
Method
addallow
adddeny
deleteallow
deletedeny
start
<ip address>
end
<ip address>
index
<value>
return
<return page> Redirect to the page <return page> after the parameter is assigned. The <return page> can
Get SDP of Streams
Note: This request requires Viewer access privileges.
Method: GET/POST
Syntax:
http://<servername>/<network_rtsp_s<0~m-1>_accessname>
122 - User's Manual
DESCRIPTION
Add allowed IP address range to the server. Start and end parameters must be specified. If
the index parameter is specified, it will try to add starting from the index position.
Add denied IP address range to the server. Start and end parameters must be specified. If
the index parameter is specified, it will try to add starting from the index position.
Remove allowed IP address range from server. If start and end parameters are specified, it
will try to remove the matched IP address. If index is specified, it will try to remove the
address from given index position. [start, end] parameters have higher priority then the
[index] parameter.
Remove denied IP address range from server. If start and end parameters are specified, it
will try to remove the matched IP address. If index is specified, it will try to remove the
address from given index position. [start, end] parameters have higher priority then the
[index] parameter.
The starting IP address to add or to delete.
The ending IP address to add or to delete.
The start position to add or to delete.
be a full URL path or relative path according to the current path. If you omit this parameter,
it will redirect to an empty page.