Table of Contents
Advertisement
2.
WIRING
2.1
Cabling Outline
Cabling between processor unit and transceiver unit
The cable between the processor unit and transceiver unit comes in lengths of 15 m,
30 m or 50 m. A connector is pre-fitted at the factory for connection at the transceiver
unit. Fit a connector to the other end of the cable. The cable may be shortened as nec-
essary.
Cabling between the transceiver unit and hull unit
Connectors are pre-fitted at the factory. The length of the cable is 5 or 10 m.
Transducer cable
A connector is pre-fitted for connection to the transducer. Attach a connector to the
other end of the cable for connection to the transceiver unit. For cable extension, use
the optional transducer cable extension kit. It enables extension of the transducer ca-
ble up to 6.6 m.
2-1
Advertisement
Table of Contents
