Transducer Cable Extension Kit Csh-1700 (Optional Junction Box); Motion Sensor Ms-100 (Option) - Furuno CSH8LMK2 Installation Manual

1.6 Transducer Cable Extension Kit CSH-1700
(Optional Junction Box)
This optional kit provides for extension of the transducer cable by 6.6 m, and can be
mounted on a deck or the bulkhead. Determine mounting location considering length
of cable assy. Maintenance space around the unit should be as shown below.
Name: Transducer cable extension kit, Type: CSH-1700, Code No.: 000-068-207
Name
Junction box
Cable assy
1.7

Motion Sensor MS-100 (option)

The optional motion sensor MS-100 measures ship's pitching and rolling angles with
a sensor, using the principles of the gyrocompass. Because it is free from error caused
by ship's vertical and horizontal motion, it can be installed at any convenient location.
However, ship's semi-permanent inclination due to loading imbalance be detected.
1.7.1 Mounting considerations
• Vibration in the mounting area should the minimal.
• Locate the unit away from areas subject to water splash.
• The ambient temperature should not exceed 50°C.
Type
CSH-1700
10S1950
100 mm
Junction box
Code No. Qty
006-800-000 1
000-141-817 6.6 m
100 mm
1. MOUNTING
1-17