Accessing The X3 Plug; Connecting The Low-Loss Header Sensor - Viessmann B2TB004 Installation Instructions Manual

Vitodens 222-F, B2TB 19, 35, 68, 125 Installation

Accessing the X3 Plug

Connecting the Low-loss Header Sensor

1. Remove the control unit cover (see page 19).
2. Remove the X3 plug from the control board. Attach
sensors and reinsert the X3 plug. Refer to the
following sensor information.
3. Reinstall the control cover.
1. Connect the low-loss header sensor (if used) to
terminals X3.4/X3.5 on the boiler control board.
Control Connections
45