Remote Controller - Casio XJ-A Series User Manual

Remote Controller

Projector operations are performed using the remote controller that comes with it. Point the remote
controller signal emitter at one of the signal receivers on the projector as you perform remote
controller key operations. The maximum range of the remote controller signal is approximately
5 meters (16.4 feet) (between signal emitter and receiver).
Important!
To avoid running down the battery, store the remote control unit so its keys are not pressed
inadvertently.
1
Remote control signal emitter
1
2
[P] (Power) key
2
Turns power on or off.
3
[INPUT] key
3
For changing the input source.
4
Keys for performing projection operations and for configuring
projector settings.
(Only XJ-A Series projectors have [ZOOM –], [ZOOM +],
[FOCUS ], [FOCUS ] keys.)
5
These keys are used with USB models only. They are mainly
4
used for File Viewer (page 27) projection operations.
5
12