Connecting Projector Cables - Casio XJ-A Series User Manual

Connecting Projector Cables

Connect the projector to a power outlet and to an input source device.
XJ-A Series
* *
1 2
Connect to the composite output terminal (pin jack type) of the video device.
Plug the mini plug end of the special AV cable that comes with the projector into this terminal. Plug the pin
plugs (yellow, red, and white) into each of the applicable video (yellow) and audio (red and white) terminals of
the video device.
XJ-M Series
* *
2 1
*1 Use this port to connect a USB flash drive (page 23), a CASIO graphic scientific calculator (page
48), or the wireless adapter that comes with the projector (see the separate "Network Function
Guide").
*2 Terminal used when accessing projector internal memory from a computer and when projecting
computer screen contents from the projector over a USB connection. For more information, see
"To copy files from a computer to projector internal memory" (page 19) and "Projecting with the
USB Display Function (USB Model Only)" (page 43).
Note
For more information about component video connection, see "Connecting to a Component
Video Output" on page 72.
For information about how to connect for RS-232C control of the projector, see "Projector
RS-232C Control" (page 83).
For information about how to connect in order to update the projector firmware or to transfer
user logo data, see "Updating Firmware and Transferring a User Logo" (page 74).
Use the RGB cable that comes with the projector to connect to the RGB output terminal of a
computer or other input source.
Use a commercially available HDMI cable to connect to the HDMI output terminal of a computer,
video equipment, or other input source.
Use the RGB cable that comes with the projector to connect to the RGB output terminal of a
computer or other input source.
Use a commercially available HDMI cable to connect to the HDMI output terminal of a
computer, video equipment, or other input source.
Use the supplied power cord to plug
the projector into a power outlet.
Connect to the composite output or S-video output of the video device.
For details, see "Connecting to a Composite Video Output or S-Video
Output (XJ-M Series Only)" (page 73).
Use the supplied power cord to plug
the projector into a power outlet.
11