Table of Contents
Advertisement
Quick Links
IMPORTANT: Please read all instructions thoroughly before operating your vehicle.
R/C MicroSizers are recommended for ages 8 and older. To ensure the safety and fun of young modelers, please follow these operating
instructions and general safety rules:
·
Adult supervision is recommended.
·
Do not allow children under age 3 to play with the R/C MicroSizers
PowerBrute or radio transmitter. The model contains small parts
which could accidentally be swallowed and cause suffocation.
·
Keep hair, loose clothing, face and fingers away from the tires
and wheels while the model is running.
·
The transmitter's antenna could also cause injury if played with
violently or looped around the neck.
·
Never operate your R/C MicroSizers PowerBrute on streets or in
any areas where full-size vehicles are.
·
Do not pick up your R/C MicroSizers PowerBrute when it is in motion.
·
R/C MicroSizers PowerBrutes were designed for indoor use
only. Outdoor use may lead to failure due to dirt and dust.
We're eager to help you get the most enjoyment from your R/C MicroSizers. If you have any problems with assembly or operation,
please do not return your model to the store. Check our website first. Many easy solutions are available there 24 hours a day, 7 days
a week.
Or, call the R/C MicroSizers Service Center at 1-866-HOBBICO (1-866-462-2426), Monday through Friday, 9:00 am - 4:00 pm Central
Time. We've backed your model by a 90-day satisfaction guarantee, so you can be confident of its quality. Happy driving!
PowerBrute
Instruction Manual
for Models HCAC0491 and HCAC0492
General Safety Precautions
R/C MicroSizers Service Center
www.microsizers.com
Box Contents
·
Do not run your R/C MicroSizers PowerBrute on rugs or
carpeting. The fibers may become tangled in the model and
cause damage or failure.
·
Never charge, run or store your R/C MicroSizers PowerBrute in
a location subject to high temperatures, low temperatures or
high humidity. Do not store in direct sunlight.
·
To avoid electronic malfunction, do not allow the truck to
become wet. Short circuits will produce a very strong electrical
current. Should your R/C MicroSizers PowerBrute become wet,
stop using it immediately.
·
Never attempt to disassemble or solder the model. Do not put
it into fire.
·
Do not drop your R/C MicroSizers PowerBrute from high places.
™
by
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hobbico R/C MicroSizers PowerBrute HCAC0491
Summary of Contents for Hobbico R/C MicroSizers PowerBrute HCAC0491
- Page 1 Or, call the R/C MicroSizers Service Center at 1-866-HOBBICO (1-866-462-2426), Monday through Friday, 9:00 am - 4:00 pm Central Time. We've backed your model by a 90-day satisfaction guarantee, so you can be confident of its quality. Happy driving!
- Page 2 How to install the batteries How to assemble your R/C MicroSizers PowerBrute STEP 1: Apply the stickers. Remove the battery cover screw with a Phillips screwdriver. Install your batteries with the correct polarity. This transmitter requires 2 "AA" alkaline batteries. Never use other types of batteries.
- Page 3 Important Battery Information Model Battery Care Transmitter Battery Care A rechargeable battery has been built in to the main body of the Always use AA alkaline batteries. If improper batteries are used model. Using the battery incorrectly will cause it to leak, rupture in the transmitter, they may become hot, leak and may rupture.
- Page 4 Troubleshooting Symptom Probable cause Correction TRUCK DOES NOT RUN Transmitter battery capacity is low, or no Install two brand-new "AA" alkaline batteries have been installed. batteries (they MUST be alkaline). Transmitter is not switched on. Move the switch of the transmitter to "ON". Then, charge the truck and race.
Need help?
Do you have a question about the R/C MicroSizers PowerBrute HCAC0491 and is the answer not in the manual?
Questions and answers