Power Indicator Lights - ViewSonic PJ700 User Manual

Power Indicator Lights

If the Lamp or Temperature indicator is red or flashing red when the ViewSonic PJ700 is turned on,
there is a problem and you should not proceed. Turn off the projector and let it cool down.
Power
E
Indicator
N
G
ORANGE
L
(steady)
I
S
GREEN
H
(flashing)
GREEN
(steady)
ORANGE
(flashing)
RED
RED
RED
RED
18 ViewSonic PJ700
Table 3: Power Indicator Lights
Lamp Temperature
Indicator Indicator
OFF OFF
OFF OFF
OFF OFF
OFF OFF
RED OFF
RED OFF
(flashing)
OFF RED (flashing)
OFF RED
Condition
Standby status–indicates that the power is on.
The ViewSonic PJ700 is in warm-up mode.
Ready for normal operation.
The ViewSonic PJ700 is in cool-down mode.
Lamp does not light–lamp failure not related to
temperature.
The lamp is not secure or the lamp cover is not
closed. Firmly reinsert the lamp and secure the lamp
cover.
The cooling fan is not operating–the ViewSonic
PJ700 requires service.
Internal overheating–the ViewSonic PJ700 should
turn off automatically or you should turn-off the
unit. Allow the unit to cool down for 20 minutes.
Make sure the air-filter is clean and the air vents are
clear before preceding.