Adjusting The Projector Angle; Figure: 5 Angle Adjustment - ViewSonic PJ700 User Manual

Adjusting the Projector Angle

Adjust the projector angle using the foot adjusters shown in Figure 5 below. See also Keystone under
"Image Menu" on page 11.
Press the release button to lower the front foot, then tilt the projector up as shown in Figure 5
1
below.
The front foot adjusts the vertical height of the projected image.
•
Release the button to lock the front foot in place.
2
Rotate the rear foot adjuster to align the image.
3
The rear foot adjusts the horizontal alignment of the projected image.
•
Front foot adjuster
Press the release button
to lower the front foot adjuster
Figure 5: Angle Adjustment
Rotate the rear
foot adjuster
ViewSonic PJ700
E
N
G
L
I
S
H
7