ViewSonic PJ755D User Manual

Portable dlp projector

Advertisement

Quick Links

The
trusted
dependable
most
,
name
projector lamp
in
sales.
http://www.myprojectorlamps.com
http://www.myprojectorlamps.ca
http://www.myprojectorlamps.eu
The following projector manual has not been modified or altered in any way.

Advertisement

Table of Contents
loading

Summary of Contents for ViewSonic PJ755D

  • Page 1 trusted dependable most name projector lamp sales. http://www.myprojectorlamps.com http://www.myprojectorlamps.ca http://www.myprojectorlamps.eu The following projector manual has not been modified or altered in any way.
  • Page 2 ViewSonic ® PJ755D PJ755D Portable DLP Projector User Guide Guide de l’utilisateur Bedienungsanleitung Guía del usuario Guida dell’utente Guia do usuário Användarhandbok Käyttöopas Руководство пользователя 使用手冊 使用手冊...
  • Page 3: Table Of Contents

    Image-I (Video Mode) .................. 18 Image-II ....................... 19 Audio ......................20 Management ....................20 PIP ....................... 21 Appendices ....................22 Troubleshooting ....................22 Replacing the lamp ..................25 Compatibility Modes ..................26 Customer Support ..................27 LIMITED WARRANTY ................... 28 ViewSonic PJ755D...
  • Page 4: Compliance Information

    EEC as amended by 92/31/EEC and 93/68/EEC Art. 5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/ EEC Art. 13 with regard to “Safety.” User Information for all Countries Notice: Use the cables which are included with the projector or specified. ViewSonic PJ755D...
  • Page 5: Important Safety Instructions

    ViewSonic PJ755D...
  • Page 6: For Your Records

    PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
  • Page 7: Usage Notice

    * Use under the following conditions: - In extremely hot, cold or humid environments. - In areas susceptible to excessive dust and dirt. - Near any appliance that generates a strong magnetic field. - Place in direct sunlight. ViewSonic PJ755D...
  • Page 8: Introduction

    * Mac compatible Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. PJ755D Projector Power Cord 1.8m Composite Video Cable VGA Cable 1.8m RCA Component S-Video Cable 1.8m...
  • Page 9: Product Overview

    Main Unit 1 . Focus Ring 2 . Zoom Ring 3 . Zoom Lens 4 . Elevator Button 5 . Elevator Foot 6 . Remote Control Receiver 7 . Connection Ports 8 . Power Socket 9 . Control Panel ViewSonic PJ755D...
  • Page 10: Control Panel

    2 . Power Indicator LED 3 . Lamp Indicator LED 4 . Power/Standby 5 . Menu (On/Off) 6 . Source 7 . Re-sync 8 . Four Directional Select Keys 9 . Enter 10 . Keystone Correction 11 . Remote Control Receiver ViewSonic PJ755D...
  • Page 11: Connection Ports

    5 . Monitor Loop-through Output Connector 6 . Component Video Input Conntector 7 . S-Video Input Connector 8 . Composite Video Input Connector 9 . Audio Input Connector 10 . Audio Output Connector 11 . Power Socket 12 . Kensington Lock Port ViewSonic PJ755D...
  • Page 12: Remote Control With Mouse Function & Laser Pointer

    9 . A/V Mute 22 . VGA Source 10 . Freeze 23 . DVI-I Source 11 . Display Mode 24 . Component Video Source 12 . Mouse 25 . S-Video Source 13 . Mouse Right Click 26 . Composite Video Source ViewSonic PJ755D...
  • Page 13: Installation

    To ensure the projector works well with your computer, please set the display mode of your graphic card less than or equal to 1024 X 768 resolution. Make sure the timing of the display mode is compatible with the pro- jector. Refer to the “Compatibility Modes” section on page 26. ViewSonic PJ755D...
  • Page 14: Powering On/Off The Projector

    4 . Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically. “ ” * If you connect multiple sources at the same time, use the Source button on the control panel to switch. * Turn on the pro- jector first and then the signal sources. ViewSonic PJ755D...
  • Page 15: Powering Off The Projector

    * When the “LAMP” indicator flashes red (1 second intervals), it indicates the fan failed. Stop using the projec- tor and disconnect the power cord from the electrical outlet, then contact your local dealer or our service center. See page 23.User Controls ViewSonic PJ755D...
  • Page 16: Adjusting The Projected Image

    1 . Press the elevator button. 2 . Lower the image, then release the button to lock the elevator foot into position. 3 . Use to fine-tune the display angle.To raise the image: Elevator Foot Elevator Button Tilt Addjusting Wheel ViewSonic PJ755D...
  • Page 17: Adjusting The Projector Zoom / Focus

    131.20" x 98.40" 164.08" x 123.06" Min.(WxH) (50.0 x 37.5cm) (125.0 x 93.8cm) (208.3 x 156.2cm) (291.7 x 218.8cm) (333.4 x 250.0cm) (416.6 x 312.5cm) Distance 3.94'(1.2m) 9.84'(3.0m) 16.40'(5.0m) 22.97'(7.0m) 26.25'(8.0m) 32.81'(10.0m) * This graph is for user’s reference only. ViewSonic PJ755D...
  • Page 18: User Controls

    * Adjusts image distortion caused by tilting the projector (±16 degrees). Four Directional Select Keys * Use to select items or make adjustments to your selection. Enter * Confirm your selection of items. (Only Analog RGB signal valid) Re-Sync * Automatically synchronizes the projector to the input source. ViewSonic PJ755D...
  • Page 19 * Press “Component” to change source to component connector. This connector supports YPbPr (480p/576p/720p/1080i) and YCbCr (480i/576i). S-Video * Press “S-Video” to change source to S-Video source. Video * Press “Video” to change source to Composite Video source. ViewSonic PJ755D...
  • Page 20: On Screen Display Menus

    If you experience a vertical flickering bar, use this function to make an adjustment. Phase “Phase” synchronizes the signal timing of the display with the graphic card. If you experience an unstable or flickering image, use this func- tion to correct it. ViewSonic PJ755D...
  • Page 21: Image-I (Video Mode)

    * Press the to increase the sharpness. Zoom * Press the to magnify an image up to a factor of 16 times on the projection screen. * Press the to diminish the zoom in image. ViewSonic PJ755D...
  • Page 22: Image-Ii

    Original Input The letterbox Advance Press OK to adjust the R (Red), G (Green), or B (Blue) for brightness and contrast. Reset Press OK to return the display parameters on all menus to their factory default settings. ViewSonic PJ755D...
  • Page 23: Audio

    You can project from behind a translucent screen with ceiling mounted projection. Lamp Press OK to adjust. Image - I Image - II Audio Language Management Lamp reminding Lamp hours Lamp reset Eco. mode Auto power off (min.) ViewSonic PJ755D...
  • Page 24: Pip

    * The PIP may not support for some high resolution signals and blue image will be displayed. * When main source and PIP source come from either DVI-I or D-SUB15 the two connectors at same time, PIP source can not be displayed even one is group 1 and the other is group 2. ViewSonic PJ755D...
  • Page 25: Appendices

    Some Notebook PCs may deactivate their screens when a second display device is in use. Refer to your computerís documentation for information on how to reactivate the monitor display. * If you are using an Apple PowerBook: In Control Panels, open the PowerBook Display to select Video Mirroring “On”. ViewSonic PJ755D...
  • Page 26 “Replacing the Lamp”. See page 25. Problem: LED lighting message Power LED Temp LED Lamp LED Message Green Standby State Warning Flashing Cooling Flashing Normal Error (Lamp failed) Flashing Flashing Error (Fan failed) Error (Over Temp.) ViewSonic PJ755D...
  • Page 27 4 . If the problem persists in spite of the above, 5 . please contact a service centre for repair. * Fan Failed: The projector will switch off automatically. please contact a service centre for repair. * Replacing the lamp: Lamp life exceed ViewSonic PJ755D...
  • Page 28: Replacing The Lamp

    3 . Disconnect the power cord. 4 . Push up and Remove the cover. 5 . Remove the 3 screws from the lamp module. 6 . Pull out the lamp module. 7 . To replace the lamp module, reverse the previous steps. ViewSonic PJ755D...
  • Page 29: Compatibility Modes

    640 x 480 i Mac DV 800 x 600 i Mac DV 1024 x 768 * i Mac DV 1152 x 870 68.49 * i Mac DV 1280 x 960 * i Mac DV 91.1 1280 x 1024 ViewSonic PJ755D...
  • Page 30: Customer Support

    T: 65 273 4018 service@sg.viewsonic.com Malaysia/Thailand F: 65 273 1566 South Africa/ www.viewsonic.com T: 886 2 2246 3456 service@sd.viewsonic.com Other countries F: 886 2 8242 3668 Hong Kong www.hk.viewsonic.com T: 886 2 2246 3456 service@hk.viewsonic.com F: 886 2 8242 3668 ViewSonic PJ755D...
  • Page 31: Limited Warranty

    If a product proves to be defective in material or workman- ship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product. Replacement product or parts may include remanufac- tured or refurbished parts or components.
  • Page 32 Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer. Projector Warranty (V3.1)

Table of Contents