Iiyama ProLite LE4262S-1 User Manual page 27

Option
Adjustment Item
Aspect Ratio
1
PIP*
Video Source
NOTE When only one of the seven signal inputs is connected to the signal source, the one
connected is automatically selected. Select Source function is not available if there is no
signal input from the selected connector or during the power management mode.
2,3
Auto Adjustment*
2
Clock Frequency*
2
Phase*
2
H Position*
2
V Position*
Option
Aspect ratio
PIP
Video Source
Auto Adjustment
Clock Frequency
Phase
H.Position
V.Position
Ambient Light Sensor
Auto Detection
Touch Feature
:Move
Enter :Enter
Problem / Option
Full Expansion display
Original Displayed at the same magnifi cation.
ON/OFF Change the ON / OFF of the PIP function.
Select from the input signals VGA and YPbPr of
Main Input
the Main screen.
Select from the input signals DVI and HDMI of
Sub Input
the Sub screen.
Select from a size "Large", "Middle" and "Small"
PIP Size
of the Sub screen.
Move the position of the
PIP Position
Sub screen.
Select the AV input.
AV
Select the S-Video input.
S-Video
Select the VGA input.
VGA
YPbPr Select the YPbPr input.
Select the DVI input.
DVI
HDMI Select the HDMI input.
Adjust Position, Clock Frequency and Phase automatically.
Too narrow
Too wide
To correct fl ickering text or lines
Too far to the left
Too far to the right
Too low
Too high
Full
OFF
VGA
16
22
50
50
OFF
OFF
ON
Exit :Exit
Button to Press
OPERATING THE MONITOR 23