TP-Link RE230 User Manual page 42

Chapter 6
1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set
for the extender.
2. Go to Wireless > WPS.
3. Enable WPS.
4. Connect via WPS:
• Client's PIN: Enable
then click CONNECT.
• AP's PIN: Enable
GENERATE to get a new PIN or click
one.
• Push Button (Recommended): Click
client device within 2 minutes.
Client's PIN and enter your device's PIN in the blank, and
AP's PIN and enter the PIN on your device. You can click
DEFAULT
Start
More Features of Your Extender
to restore the PIN to its factory
and push the WPS button on the
39