TP-Link RE230 User Manual page 16

Chapter 2
2. Wait until the Signal LED
connection is successful.
Note:
If the LED does not turn solid on, try again or refer to
Browser.
3. (Optional) If the extender connects to a dual band router, repeat steps 1 and 2 above
to connect to the other band.
4. Relocate your extender for optimal Wi-Fi coverage and performance.
1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone.
The location you choose must be within the range of your router.
2 ) Wait for about 2 minutes until the Signal LED
relocate the extender closer to the router to achieve better signal quality.
Note:
To minimize signal interference, please choose a location which is far away from Bluetooth devices and other
household electronic devices, such as cordless phones, microwave ovens and baby monitors.
5. Enjoy! Connect to the extended network and enjoy the Internet.
changes to solid on, which indicates that the WPS
Router
Extended Network Names:
Router's network name with _EXT at the end
or
Same as your OneMesh router
Passwords:
Same as your router
Solid On
Set Up Internet Connection
Method 1: Via the TP-Link Tether App
turns solid white. If it doesn't,
Halfway
or Method 2: Via a Web
Suitable location
Too far from router
No connection
Devices
13