Table of Contents
Advertisement
Installation
1
Connecting the Hub
1.
Ensure that the Hub is switched OFF.
2
2.
Place the Hub within three feet from the dongle. Ensure
that the two units are facing.
3
3.
Power ON the Hub. Check that the LEDs light.
4.
The system will automatically detect and begin
4
installation of the connected device using the "Found
New Hardware Wizard".
5
6
5.
Select "No, not this time", and click "Next".
6.
Follow the instructions in the Wizard using the same
procedure as in setting up the dongle.
7.
The "Hardware Installation" window is displayed.
Figure 7: Found New Hardware Wizard
12
12
12
Advertisement
Table of Contents
