Table of Contents
Advertisement
7O0321_WN7712A-LF-AK_P75454-B_F5D8073 v3000_N wrs nc_mnl.doc
Page 44 of 58
3. Click "Save" to finish. Encryption in the wireless router (or access point) is now
set. Each of the computers on your wireless network will now need to be
configured with the same security settings.
WARNING: If you are using a wireless client to turn on the security settings in
your wireless router (or access point), you will temporarily lose your wireless
connection until you activate security on your wireless client. Please record the
key prior to applying changes in the wireless router (or access point). If you don't
remember the hex key, your client will be locked out of the wireless router (or
access point).
WPA-PSK (no server)
Choose this setting if your network does not use a radius server. WPA-PSK
(no server) is typically used in home and small office networking.
1. From the "Network Authentication" drop-down menu, select "WPA-PSK (no
server)".
2. Enter your network key. This can be from eight to 63 characters and can be
letters, numbers, or symbols. This same key must be used on all of the clients
(network cards) that you want to include in your wireless network.
[insert UCUI-EditInfo-Adv.tif]
Advertisement
Table of Contents
