Belkin G User Manual page 8

F5D9231-4_V1000_G+MIMO_RTR_MNL-CLEAN.doc
Page 8 of 111
The Setup Assistant, second generation of Belkin's renowned Easy Install
Wizard, takes the guesswork out of setting up your Router. This automatic
software determines your network settings for you and sets up the Router
for connection to your Internet Service Provider (ISP). In a matter of
minutes, your Router will be up and running on the Internet.
Note: Setup Assistant software is compatible with Windows 2000, XP, and
Vista; and Mac OS X v10.x. If you are using another operating system, the
Router can be set up using the Alternate Setup Method described in this
User Manual (see page xx) [VERIFY PAGE NUMBER].
Integrated G+MIMO Wireless Access Point
G Plus MIMO is an exciting new wireless technology that achieves data
rates up to 54Mbps. Actual throughput is typically lower than the
connected data rate and will vary depending on your networking
environment.
*NOTE: The standard transmission rate—54Mbps—is the physical data
rate. Actual data throughput will be lower.
MAC Address Filtering
For added security, you can set up a list of MAC addresses (unique client
identifiers) that are allowed access to your network. Every computer has
its own MAC address. Simply enter these MAC addresses into a list using
the Web-Based Advanced User Interface and you can control access to
your network.