Belkin G User Manual page 71

F5D9231-4_V1000_G+MIMO_RTR_MNL-CLEAN.doc
Page 71 of 111
2. The following message will appear. Click "OK".
9230_Restore_Factory_Default_Confirmation.jpg[keep]
3. The following message will appear. Restoring the defaults includes restarting
the Router. It can take up to 60 seconds. It is important not to turn the power
to the Router off during the restart.
9230_Restore_Factory_Default_Confirmed.jpg[keep]
4. A 60-second countdown will appear on the screen. When the countdown
reaches zero, the Router's defaults will be restored. The Router home page
should appear automatically. If it does not, type in the Router's address
(default = 192.168.2.1) into the navigation bar of your browser.
Saving a Current Configuration
You can save your current configuration by using this feature. Saving your
configuration will allow you to restore it later if your settings are lost or changed.
It is recommended that you back up your current configuration before performing
a firmware update.
[insert save Current Settings.tif]