Belkin G User Manual page 60

F5D9231-4_V1000_G+MIMO_RTR_MNL-CLEAN.doc
Page 60 of 111
Setting up an Allow Access List
1. Select the "Allow" radio button (1) to begin setting up a list of computers
allowed to connect to the wireless network.
2. Next, in the "MAC Address" field that is blank (3), type in the MAC address of
the wireless computer you want to be able to access the wireless network,
then click "<<Add" (4).
3. Continue to do this until all of the computers you want to add have been
entered.
4. Click "Apply Changes" (5) to finish.
Setting up a Deny Access List
The "Deny Access" list lets you specify computers that you DO NOT want to
access the network. Any computer in the list will not be allowed access to the
wireless network. All others will.
1. Select the "Deny" radio button (2) to begin setting up a list of computers to be
denied access to the wireless network.
2. Next, in the "MAC Address" field that is blank (3), type in the MAC address of
the wireless computer you want to deny access to the wireless network, then
click "<<Add" (4).
3. Continue to do this until all of the computers you want to deny access to have
been entered.
4. Click "Apply Changes" (5) to finish.
(1) (2)
[insert Mac_Address.tif]
(3)
(4)
(5)