Table of Contents
Advertisement
7. About Hardware
*1
The non-linearity error means an error of approximately 0.1% occurs over the maximum range at 0°C and 50°C
ambient temperature.
*2
When using the signal source equipped with the high-speed operational amplifier
*3
This numerical displays the conversion speed for A/D, D/A converter. The minimum executable sampling cycle
depends on the operating condition of the terminal.
*4
You cannot use both the DI00 / DI01 / DI02-pin of digital input feature and the external start / stop signal /
external clock input simultaneously.
*5
Each input accept TTL (5VDC) level signals.
*6
The USB transfer speed depends on the host PC environment used (OS and USB host controller).
*7
As a USB hub is also counted as one device, you cannot just connect 127 USB terminals.
64
AIO-160802GY-USB, AI-1608GY-USB
Advertisement
Table of Contents
