Table of Contents
Advertisement
2. Setup
(3) The property page for the device opens.
Enter the device name in the common settings tab page and then click [OK].
The device name you set here is used later when programming.
*
The product-specific number will be displayed as the serial number.
*
The initial device name that appears is a default value. You can use this default name if you wish.
*
Make sure that you do not use the same name for more than one device.
You have now finished installing the initial setting of Software.
18
* The name of the connected
product will be displayed.
- AIO-160802GY-USB
- AI-1608GY-USB
AIO-160802GY-USB, AI-1608GY-USB
Advertisement
Table of Contents
