Contec AI-1608GY-USB User Manual page 61

6. Functions
Setting data
Use a software command to save the data in memory.
The figure below shows the relationship between the conversion data stored in memory and the
sampling count and conversion channels.
The procedure for setting the conversion data is different depending on the memory format being used.
- Procedure for FIFO format
When using FIFO format, setting data to memory is always performed from the most recent data.
New data can be added during conversion.
- Procedure for RING format
When using ring format, a ring memory area large enough for the data to be set is reserved.
Data cannot be modified during DA conversion.
54
AIO-160802GY-USB, AI-1608GY-USB