Table of Contents
Advertisement
Display Rotation
(M 9-7)
→
"Settings"
"Phone Settings" tab
1. Select "Rotation 90°to".
2. Select the desired function.
To Set for Answering Incoming Calls
→
"Settings"
"Phone Settings" tab
1. Select "Answer calls".
2. Select "Portrait: Answer call.".
Setting the Sound Output
→
"Settings"
"Phone Settings" tab
output"
1. Select "Earphone only" or "Earphone + speaker".
Change Menu
(M 9-10)
→
"Settings"
"Phone Settings" tab
1. Select "Standard Menu" or "Large Font Menu".
Security Settings
(M 9-11)
→
"Settings"
"Phone Settings" tab
94
Settings
→
"Display Rotation"
→
"Display Rotation"
(M 9-8)
→
"Switch ringtone
→
"Change Menu"
→
"Security Settings"
Enabling/Disabling the PIN Code
If the PIN code is enabled, you are asked to enter the PIN code each
time the phone is switched on. Your PIN code is registered on the
SIM/USIM card and you should have been made aware of the code
when you purchased the SIM/USIM card. Contact your service
provider for further details.
Select "On" for "PIN Entry" and enter your PIN code if you wish to
activate the PIN lock.
Note
• If you enter the wrong PIN code three times, the SIM/USIM card
will lock. To remove the lock, contact your service provider or
SIM/USIM card vendor.
To Change the PIN Code
This allows you to change the PIN code registered on the SIM/USIM
card. Before you change the PIN code, select "On" for "PIN Entry".
Enter the existing PIN code for "Change PIN" after selecting "PIN
Entry", and enter a new PIN code twice.
To Change the PIN2 Code
PIN2 is a second PIN code used to unlock certain features of a SIM/
USIM card, such as Fixed Dialling and Call Cost metering. Not all
SIM/USIM cards use the PIN2 code. This menu may not be
displayed depending on the type of your SIM/USIM card.
Enter the existing PIN2 code for "Change PIN2", and enter a new
PIN2 code twice.
Advertisement
Table of Contents
