Installing The Appliance In A Bbq Island - Blaze Outdoor Products BLZ-4LTE2 Use & Care Manual

Table of Contents

Advertisement

Installing the Appliance in a BBQ Island

NOTE: Check with City and Fire department for Local Building Codes. A Permit may be
required for outdoor kitchen construction.
You will need a second person to help you avoid damaging the appliance or your appliance island.
Ensure all clearances to combustibles are maintained. See page 25.
The island must be made out of non-combustible material. In the event it is combustible, the use of an
insulation jacket is REQUIRED.
A distance of 5" will be needed behind the grill for the lid to open and close. Remember that should
combustible materials (such as a combustible wall) be located behind the grill that the needed 5" for lid
clearance doesn't satisfy the distance required from a combustible surface.
Protection from Weather: Keep the appliance protected from adverse weather,
including rain and wind. Wind, particularly coming into the rear of the grill, can
affect the exhaust from escaping from the grill. This can back up the heat behind
the control panel potentially creating a gas leak, damage to the product, and
injury. A wind block behind the grill may be necessary.
Blaze Outdoor Products Instructional Book
Page | 21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Blz-5lte2Blz-4lte2ngBlz-4lte2lpBlz-5lte2ngBlz-5lte2lp

Table of Contents