Table of Contents
Advertisement
Operating Instructions
Operating Instructions
(continued)
CHECK FILTER FEATURE, YOU WILL SEE:
Note: This feature is a reminder
to clean the Air Filter (See Care
and Cleaning) for more efficient
operation. The LED (light) will
illuminate after 250 hours of
operation. To reset after cleaning
the filter, press the "Filter Reset"
button and the light will go off.
TO CHANGE TEMPERATURE DISPLAY:
FAULT CODES
If the display reads "AS" ,
a sensor has failed. Contact
your Authorized Frigidaire
Service Center.
8
2009 Electrolux Home Products, I
DO THIS:
PRESS AND HOLD
THE UP/DOWN
BUTTONS TOGETHER
FOR 3 SECONDS
n
. c
RESET BUTTON
YOU WILL SEE:
Note: The control is capable of displaying temperature
in degrees Fahrenheit or degrees Celsius.
TO TURN UNlT OFF:
PRESS ON/
OFF BUTTON
Note: If the unit is turned off in heat mode
(if applicable) or fan only mode, it will return
to the same setting when it is turned on again.
When the unit is turned off in cool or energy
saver mode, it will run in energy saver mode.
when it is turned on again, but the setting of
temperature and fan speed will remain.
DO THIS:
PRESS FILTER
DO THIS:
l A
r l
g i
h
s t
r
s e
r e
e v
. d
Advertisement
Table of Contents
