Samsung RF28R7351SR User Manual page 32

Installation
STEP 2 Flooring
If the refrigerator cannot pass through the entrance due to its size, see Door removal for
entrance.
STEP 3 Door removal for entrance
If the refrigerator cannot pass through the entrance to your home or kitchen due to its
size, follow these instructions to remove and then re-install the refrigerator's doors. If you
do not need to remove the doors, go to page 40 to continue the installation procedure.
WARNING
Unplug the power cord of the refrigerator before removing the doors.
Tools required (not provided)
Phillips screwdriver
Pliers
32 English
Untitled-5 32
NOTE
To prevent floor damage, make sure the
front levelling legs are in the upright
position.
• The surface you install the refrigerator
on must support a fully loaded
refrigerator.
• To protect the floor, put a large piece
of cardboard along the path to the
refrigerator's final installation location.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to move the refrigerator, place
thick paper or cloth such as old carpets
along the path of movement.
Flat-heat screwdriver
Allen wrench 5 mm
Socket wrench 10 mm
2021-06-22 5:15:41