Yaesu FT-857 Operation Manual page 57

KEY REV ] . The default setting for this feature is "NORMAL," whereby the "Tip" con-
nection on the Key Plug is "Dot" and the "Ring" connection is "Dash." To change the
paddle polarity:
Ÿ Press and hold in the [ FUNC ] key for one second to enter the Menu mode.
Ÿ Rotate the SELECT knob to recall Menu Mode No-001 [ EXT MENU ] , then rotate
the DIAL to change the setting to "ON" to enable the extended Menu Mode, if needed.
Ÿ Rotate the SELECT knob to select Menu Mode No-025 [ CW KEY REV ] .
Ÿ Rotate the DIAL knob to select the new setting.
Ÿ When done, press and hold in the [ FUNC ] key for one second to save the new setting
and exit to normal operation.
Menu Mode No-025 [CW KEY REV] is most frequently utilized five minutes be-
fore a contest, when you realize your keyer paddle is wired backwards!
FT-857 Operating Manual
T
RANSMITTER
CW T
RANSMISSION
O
PERATION
55