Tv Setting - Venturer PLV1615S Owner's Manual

TV SETUP

TV SETTING

1. Press the TV MENU button.
2. Use the or
confirm the setting.
3. Use the or
to change the channel no.
4. Use the or
change from AIR (over-the-air broadcasts) to CABLE (cable/satellite broadcasts).
5. Use the or
confirm the selection. The unit will immediately search through all possible TV
channels and store those channels with signals in memory. After this is complete,
the unit will switch to the first channel found.
6. To exit the MAIN MENU and return to the normal screen, press the EXIT button.
Note : This option is available in TV mode only.
Remarks:
• Channel no. : 2-69 channel for Air mode, 1-
125 channel for Cable mode.
• Tuning mode : Air or Cable mode are available.
• Auto tune : Searches for usable stations and
stores them in memory.
• Skip : ON
OFF - No channel skip.
• Fine tune : The frequency changes to allow fine
tuning.
• AFC : Auto frequency control.
• MTS : Select the Mono sound/Stereo sound/
Secondary Audio Program (SAP). Refer to the
section titled "MTS SETTING" for instructions.
PLV16151S1 VEN - WM CANADA.pmd
button to select the TV setting menu, then press the
button to select the Channel no. setting and use the
button to select the Tuning mode and use the
button to select the Auto tune and press the
- Skip weak channels.
20
20
button to
or button
or button to
or button to
TV MODE
1/10/2007, 5:06 PM