Connecting A Tv Antenna/Cable/Satellite; Connecting The Ac Power Cord - Venturer PLV3117i Owner's Manual

connecting a tV antenna/caBLe/SateLLite

cOnnectInG a tV antenna/caBle/SatellIte
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
note:
For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna.
Should you require the use of a temporary antenna, please ensure that you purchase an antenna
with sufficient ability to receive in weak signal areas. Only when you are in close proximity to a
transmitter will a temporary antenna reproduce a signal as strongly as a fixed antenna.
Satellite, cable, or
tV antenna cable to
tV antenna terminal
(cable not included)

connecting the ac PoWer cord

cOnnectInG tHe ac POWeR cORd
• Connect the AC power cord into an AC power
outlet.
• Press the StandBy/On button on the left side of
the unit or use the remote control to turn on the
unit.
notes:
• Be sure the AC power cord is disconnected and all
functions are off before making connections.
• Make sure that all the components are connected
correctly.
• to prevent electrical shock, match wide blade of
ac power cord to wide slot of ac power outlet,
then fully insert.
• When you are not going to use the unit for a long
period of time, disconnect the AC power cord.
E - 11