SAFETY PRECAUTIONS caution RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE AVIS RISQUE DE CHOC ÉLECTRIQUE -NE PAS OUVRIR WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (Including amplifiers) that produce heat.
TAbLE OF CONTENTS SafeTy PreCauTIonS ... 2 IMPorTanT SafeTy InSTruCTIonS ... 3 Table of ConTenTS ... 4 QuICK InSTallaTIon ... 5 TURNING ON THE UNIT FOR THE FIRST TIME ...5 aCCeSSorIeS ... 6 GeTTInG STarTeD ... 6 USING THE REMOTE CONTROL ...6 ConTrol referenCe GuIDe ...
QUICK INSTALLATION When you turn on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit as shown.
PLEASE ChECK AND IDENTIFY ThE SUPPLIED ACCESSORIES. Remote control (with batteries) ... x 1 GETTING STARTED USING ThE REMOTE CONTROL • Point the remote control at the remote sensor located on the unit. • When there is a strong ambient light source, the performance of the infrared remote sensor may be degraded, causing unreliable operation.
CONTROL REFERENCE GUIDE REMOTE CONTROL PLV76198S23E10 IB ENG.indd 7 MUTE Button Press to turn off the sound. MENU Button Press to display the on-screen menu or switch back to the previous menu screen. CURSOR ( , , , ) Buttons Use to highlight selections on a menu screen and adjust certain settings.
CONTROL REFERENCE GUIDE AUDIO IN (Left/Right) / VIDEO IN jacks / ON button Turns the unit on and off. MENU button Enters the on-screen TV menu. FUNCTION button Selects TV / AV. / CH buttons Press to confirm selections on the TV menu screen and VOL + / VOL - controls Adjusts the volume level and highlights selections (Left &...
CONNECTIONS CONNECTING A Tv ANTENNA To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system NOTE For optimal reception of over-the-air TV broadcasts, we recommend that you use an external fixed antenna. If using an indoor antenna, please ensure that you purchase an antenna with sufficient ability to receive signals in your home.
CONNECT ThE POWER CORD • Connect the AC power cord into a wall outlet. • Press the / I button on the unit or remote control to turn on the unit. NOTE • Be sure the AC power cord is disconnected and all functions are off before making connections. •...
INSTALLING / REMOvING ThE bASE STAND WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. Do NOT exert pressure on the front of the unit at any time because the screen could crack.
PICTURE MENU 1. Press the MENU button. 2. Press ENTER or button to highlight Picture Mode. 3. Use the button to select other options (Contrast, Brightness, Sharpness, Color, Tint, Aspect Ratio & Color Temperature). 4. Use the ENTER or button to make adjustment. The screen will adjust to your selected setting immediately.
Tv MENU 1. Press the MENU button. 2. Use the button to select TV setting. 3. Press ENTER or button to highlight Antenna, then use the button to select other options (DTV Signal, Auto Scan, Auto Scan Add CH, Channel Skip & Channel Labels). 4.
TROUbLEShOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. • Check that the AC power cord is connected. • The unit is not turned on. The remote does not • Remove any obstacles between the remote and the unit. function. • Use the remote near the unit. •...
YOUR UNIT TO VENTURER WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products will be used for repairs by VENTURER at its designated Service Center for ninety (90) days from the effective warranty date. Such replacement parts or products are warranted for an additional ninety (90) days from the date of repair or replacement.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of VENTURER arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days from the date of purchase.