Download Print this page

Problem Solver - Maytag MMV1174FZ User Manual

Advertisement

Following is a list of available parts and supplies which may be purchased separately. Please refer to the cover for contact and model
identification information.
Replacement Parts
Turntable
Turntable support and rollers
Turntable hub
Grease filter
Charcoal filter
Cooktop light bulb
Cavity light bulb
Scan the code at left with your mobile device, or visit
https://www.maytag.com/product_help for more recommendations that may help you avoid a
service call.
If you experience
Recommended Solutions
Microwave oven will
Check the following:
not operate
Arcing in the
Check the following:
microwave oven
Turntable alternates
rotation directions
Display shows
messages
Fan running during
cooktop usage
Radio, TV or
Check the following:
cordless phone
interference

PROBLEM SOLVER

Household fuse or circuit breaker - If a household fuse has blown or a circuit breaker has tripped, replace
the fuse or reset the circuit breaker. If the problem continues, call an electrician.
Magnetron - Try to heat 1 cup (250 mL) of cold water for 2 minutes at 100% cooking power. If water does
not heat, try the steps in the bullets below. If microwave oven still does not operate, call for service.
Door - Firmly close door. On some models, if a packaging spacer is attached to inside of the door, remove
it, then firmly close door.
If a message about the door appears in the display, the door has been closed for 5 minutes or more without
the microwave oven being started. This occurs to avoid unintended starting of the microwave oven. Open
and close the door, then start the cycle.
Control - Make sure control is set properly. Make sure Control Lock is off. Make sure Demo Mode (on some
models) is off.
Soil buildup - Soil buildup on cavity walls, microwave inlet cover, cooking rack supports, and area where
the door touches the frame can cause arcing. See "General Cleaning" in "Microwave Oven Care" section.
This is normal and depends on motor rotation at the beginning of the cycle.
A flashing ":" or "PF" means there has been a power failure. Reset the clock.
A letter followed by a number is an error indicator. Call for assistance.
This is normal. The microwave oven's cooling fan (on some models), which is separate from the vent
fan, automatically comes on during microwave oven operation to cool the microwave oven. It may also
automatically come on and cycle on and off to cool the microwave oven's controls while the cooktop below
is being used.
Proximity - Move the receiver away from the microwave oven, or adjust the radio or TV antenna.
Soil - Make sure the microwave oven door and sealing surfaces are clean.
Frequency - Some 2.4 GHz-based cordless phones and home wireless networks may experience static or
noise while microwave oven is on. Use a corded phone, a different frequency cordless phone or avoid using
these items during microwave oven operation.
ACCESSORIES
Cleaning Supplies
Heavy Duty Degreaser
affresh
Kitchen Appliance Cleaner
®
affresh
Stainless Steel Cleaner
®
affresh
Stainless Steel Wipes
®
5

Advertisement

loading