Web Operation; Network Connection; Login And Main Interface - Dahua DHI-ITC237-PW1A-IRZ User Manual

5 Web Operation

This series HD intelligent traffic camera product supports the Web access and management via
PC.
Web client end includes several modules: monitor channel list, record search, alarm setup and
etc.

5.1 Network Connection

Please follow the steps listed below for network connection.

Make sure the HD intelligent traffic camera has connected to the network properly.

HD intelligent traffic camera IP address and PC IP address shall be in the same network
segment. If there is router, please set the corresponding gateway and subnet mask.

Use order ping ***.***.***.***(* HD intelligent traffic camera address) to check connection is
OK or not.

5.2 Login and Main Interface

Step 1. Open IE and input HD intelligent traffic camera address in the address bar.
For example, if your camera IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE
Figure 5- 1
address bar. See
Step 2. Select ACCEPT.
System pops up warning information to ask you whether install control webrec.cab or not. Please
click OK button, system can automatically install the control. When system is upgrading, it can
overwrite the previous Web too.
If you can't download the ActiveX file, please check whether you have installed the plug-in to
disable the control download. Or you can lower the IE security level. See 错误！未找到引用源。.
.
Figure 5- 1
Input your IP
address here
7