Casio Exilim EX-ZR3500 User Manual page 65

NOTE
• After shooting a snapshot, the camera will return to standby. Any one of the
following will cancel a Motion Shutter operation.
– Shooting 30 Motion Shutter snapshots
– Pressing the shutter button during standby
– Tilting the monitor screen
– Rotating the camera
• The Motion Shutter may not operate properly when there is little difference
between the subject and the background of the icon, or when the subject is located
far away from the camera.
• (preview icon) will appear on the monitor screen when a snapshot is shot.
When the camera detects movement in the vicinity of the preview icon, it will
display the image that was shot for three seconds.
• "O Tracking" cannot be selected for the AF area setting while shooting with the
Motion Shutter. If "O Tracking" is selected in another mode, selecting the Motion
Shutter will cause the AF area setting to change to "U Spot" (page 107).
• You cannot shoot a snapshot by pressing the shutter button while movie recording
is in progress (Snapshot In Movie).
65
Snapshot Tutorial