Casio Exilim EX-ZR3500 User Manual page 149

NOTE
• After the camera is paired, Bluetooth wireless technology operation will consume
battery power even when the camera it turned off. Because of this, it is
recommended that you charge the camera's battery before you plan to use it.
• Removing the camera's battery will terminate the Bluetooth wireless technology
connection. However, the connection will be re-established when you load a
battery into the camera and turn on the power again.
. Smartphone that does not support Bluetooth low energy
Configure smartphone wireless LAN connection settings (input the camera SSID and
password).
1.
Press [W] (Wireless).
2.
Use [8], [2], [4], or [6] to select "Shoot
with phone", and then press [SET].
3.
Use [8] and [2] to select "Remote Start",
and then press [SET].
This will enable connection with a smartphone and
the camera will display a screen for input of an
SSID and password.
4.
For the smartphone Wi-Fi setting, input the camera SSID and
password.
When the message "Start up the phone app." appears on the camera's monitor
screen, it means that the smartphone has established a wireless connection with
the camera.
• What you need to do to establish a wireless LAN connection depends on the
type of smartphone you are using. For details about how to establish a wireless
LAN connection see the user documentation that comes with your smartphone.
. What to do if you are unable to establish a wireless LAN connection
between the camera and a smartphone.
This problem may be caused when the smartphone is already wirelessly connected to
one of the networks or devices below. Go to your smartphone's Wi-Fi settings and
select this camera's SSID.
– Household wireless LAN
– Public wireless LAN
– Portable wireless LAN device
Connecting the Camera with a Smartphone
149
password
SSID
(Wireless Connection)