Casio Exilim EX-ZR3500 User Manual page 127

. Selecting the HDMI Terminal Output Method (HDMI Output)
Use this setting to select the digital signal format when connecting to a TV with an
HDMI cable.
1.
In the PLAY mode, press [MENU].
2.
Press [4], use [8] and [2] to select the "¥ SETTING" tab, and then
press [6].
3.
Use [8] and [2] to select "HDMI Output", and then press [6].
4.
Use [8] and [2] to select the output method, press [SET].
This setting will cause the format to change automatically in
Auto accordance with the connected TV. Normally, you should use this
mode.
1080i 1080i format output*
480p 480p format output
576p 576p format output
*
1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required
output method may be 576p when outputting to a digital TV in a PAL reception
area that does not support 1080i 60i. If you are in a PAL reception area and
nothing is displayed automatically, change the setting to 576p.
• If an image does not appear when "Auto" is selected as the output method, try
changing this setting to something else.
IMPORTANT!
• The "HDMI Output" setting cannot be changed as long as there is an HDMI cable
connection between the camera and a TV. Disconnect the HDMI cable from the
camera to change the "HDMI Output" setting.
127
Viewing Snapshots and Movies