Symbol Description - Uniden TRAX436 Owner's Manual

How Do I Use It?
GPS Time
Altitude
Speed Limit
Most of the fields on this screen have a
shows whether the field it is attached to is shown on the map as a Trip Data.
It also shows the position of the data as follows:
Symbol Description
This value is not shown on the map screen.
Page 88
Shows the current time
corrected with time zone offset.
The accurate time comes from
the GPS satellites, and the time
zone information comes from the
map or it can be set manually in
Regional settings.
Shows the elevation if it is
provided by the GPS receiver.
Shows the speed limit of the
current street if the map contains
it.
If you tap the previous button,
this one replaces it.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Tap this field to show
it on the map screen
in one of the Trip Data
fields.
Opens a new screen
with three resettable
Trip Computers.
Tap this button to
change the content of
the Route Data fields
to show information
about the next via
point.
Tap this button and
the Route Data fields
show information
about the final
destination again.
symbol next to them. This symbol