Navigation Settings; You Can Control How Trax436 Behaves - Uniden TRAX436 Owner's Manual

Navigation settings

You can control how TRAX436 behaves during navigation. Tap the following
buttons: ,
Type Description
Keep Position This feature allows car drivers to always correct GPS
on Road
position errors by matching the vehicle position to the
road network. For pedestrian navigation, this feature
is automatically disabled to let the software show your
exact position.
By turning off this feature you also turn off the GPS
position error filtering. The position shown on the
map will be subject to all position errors and position
fluctuations.
Off-route This switch tells TRAX436 whether to automatically
Recalculation
recalculate the route when you deviate from it. If
this feature is turned off, you need to initiate route
recalculation manually otherwise navigation will be
stopped until you return to the originally recommended
route.
Setting another point than the current GPS position
as the start point of the active route will automatically
disable this feature.
Restore Lock- If you have moved or rotated the map during navigation,
to-Position this feature moves the map back to your current GPS
position and re-enables automatic map rotation after the
given period of inactivity.
, .
How Do I Use It?
Page 109