Uniden TRAX436 Owner's Manual page 102

How Do I Use It?
Button Description
You can fine-tune the appearance and
content of the Map screen.
You can adjust the sounds of TRAX436.
These settings determine how routes will be
calculated.
These settings allow you to adjust the
application to your local language,
measurement units, time and date and
their formats, as well as choose the voice
guidance profile you prefer.
You can control how TRAX436 behaves
during navigation.
You can enable some handy warnings, and
disable the touch screen in a moving vehicle
with Safety Mode.
You can set up the connection to the GPS
receiver.
You can set up the connection to the TMC
receiver. If the TMC receiver is working, you
can select the radio station to be received.
You can modify the look and behaviour of
the Menu screens.
You can change some device settings to control
the screen backlight when TRAX436 is running.
You can set up an automatic Track Log
saving, and fine-tune its settings.
This screen has no navigation feature. It merely
provides information about the maps and
licenses included with your navigation system.
You can switch to Simple mode. In Simple
mode only a few of the above settings are
available. The rest of the settings are set to
values that are optimal for typical use.
Page 102
Reference
Page 103
Page 104
Page 105
Page 107
Page 109
Page 110
Page 112
Page 112
Page 113
Page 113
Page 114
Page 17