About This Product; Specifications; Features - NEC N8190-154 User Manual

1. About This Product

1-1. Specifications

Fibre Channel interface
Fibre Channel link speed
PCI EXPRESS Connector
Physical dimensions
Weight
Operating voltage
Power consumption
Environmental
condition

1-2. Features

The N8190-154 Fibre Channel Controller (2ch) is a Fibre Channel host bus adapter card. This
product has two Fibre Channel interface connectors.
Notice
Item
Short wave laser (LC connector) x 2
8Gbps,4Gbps
X8
64.42mm(W) x 167.64mm(D)
Under. 0.2kg
PCI EXPRESS 3.3V/12V
Typical 8.8W
Max
Temperature 0 - 45 degrees C
Operating
Humidity
Temperature -40- 70 degrees C
Storage
Humidity
Do not connect this product to a computer or Fibre Channel device that is not
recommended by NEC Corporation. If the product is connected to a computer or
Fibre Channel device that is not recommended by NEC Corporation, the product
may malfunction or fail.
Please contact the retailer or service center for the information on recommended
computers and or Fibre Channel devices.
This product is designed to transfer data at high-speed. For the best performance,
it is important to avoid your PCI EXPRESS bus becoming a bottleneck that will
result in slow data transfer. If you use a PCI EXPRESS 1.X slot for this product,
you can connect this product in more than X8 bandwidth slot and if you use a PCI
EXPRESS 2.0 slot for this product, you can connect this product in more than X4
bandwidth slot.
Specification
13.3W
5 - 95 %
5 - 95 %
- 31 -
Remarks
SFP+ module x 2
Support
PCI EXPRESS 2.0
No condensation