Standard Wall Plate Mounting - Uniden EXI 6960 Owner's Manual

DO NOT use an outlet
controlled by a wall switch.
Before you plug the other end
of the telephone cord into the
modular jack on the wall,
charge the battery (refer to
"Charging the Battery Pack,"
page 12).
6
2) Flip the handset retainer over so
the tab is facing up.
3) Slide the handset retainer back
onto the base.

Standard Wall Plate Mounting

This phone can be mounted on any standard telephone wall plate.
1) Plug the AC adapter into the DC
input jack on the back of the
base, then place the AC adapter
cord inside the left molded
channel cord holder.
2) Plug a short telephone cord into the
jack on the base, then
TEL LINE
place the telephone cord inside the
right molded channel cord holder.