Table of Contents
Advertisement
NOTE
If you have no New Caller ID
Messages, then the "New"
display is blank. Only the
"Total" display appears.
NOTE
Once a Caller ID message
has been viewed, it is no
longer considered a
new message.
2) Use the : and ; keys to move the cursor to the selection that you
would like to change. Press the
Off
Autotalk
for
keypad to enter or change the area code, then press
confirmation tone indicating the area code has been changed.)
3) After you have made your selections, press
handset to the base. The
setup changes are now effective.
Screening Your Calls
Caller ID allows you to review caller
information before you answer your
phone. When the phone rings, the
display shows the date, time, call count,
name, and phone number of the caller.
If your Caller ID service is number only,
then the name does not appear on the second line.
If a name or number is not available, the display will show a
Incomplete Data
message such as
Private Name
, etc.
Using CIDCW (Caller ID on Call Waiting)
1) During a call when you hear the
Call Waiting tone, check the handset
for the name and number of the
incoming caller.
2) Press flash to accept the incoming call. See page 15 for
additional information.
key to toggle between
select
CIDCW
and
. Press
select
call id
LED flashes, indicating that your
status
Private Number
,
On
and
and use the number
again. (You hear a
select
and return the
12/21 12:30PM 03
Schlitz Kaysie
817-555-1212
,
Talk
0:00
Schlitz Kaysie
817-555-1212
21
Advertisement
Table of Contents
