Operation
Assembling your stick steam cleaner
Push handle into main body.
Before you begin cleaning
IMPORTANT: Please refer to floor manufacturer's care recommendations before use and test the
steamer on a discrete area of flooring to begin with.
WARNING: To reduce the risk of personal injury, unplug the steamer when assembling the unit.
IMPORTANT: Do not over-fill the water tank.
Remove the clean
water tank.
4
Screw handle in place.
Twist the cap
anti-clockwise to remove.
Attach microfibre pad to floor head.
Fill the tank with 400ml
of water and replace the
water cap, Tighten by
twisting clockwise.
Replace the clean water
tank, clicking into place
making sure the hard water
filter is in place.